7 - c
II-B. Description (2-temperature model D183 - D283)
A
Lighting mode
B
Open door alarm
C
Chilling compartment temperature zone (lower
compartment of the cabinet)
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Maturing compartment temperature zone (main
compartment of the cabinet)
H
Confirmation and setting access key
III-B. Temperature setting
Chilling compartment recommended temperature setting range: 6 - 10 °C.
Maturing compartment recommended temperature setting range: 10 - 14 °C.
Press and hold down the
1
Press and hold down the
The display will start to flash.
3
Press the
button to confirm.
The maturing compartment temperature display will flash.
28
EN
N 83V2-0511.indd 28
ommissioning your Wine caBinet
key for 5 secs to power up.
key for approximately 5 secs.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
I
Setting and selection keys
J
Lighting mode access and confirmation key
K
Charcoal filter meter access key
L
Standby key
M
Humidity level alarm
N
Relative humidity level or maturing compartment
temperature display
O
Hot circuit indicator
P
Cold circuit indicator
Q
Chilling compartment temperature display
2
Press the
or
keys to set the desired temperature.
in the chilling compartment
4
Press the
or
keys to set the desired temperature in
the maturing compartment.
5
Press the
button to confirm.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
•
For the chilling compartment, the default setting is 8 °C (ideal chilling
temperature). However you can set the temperature between 5 - 12 °C.
•
For the maturing compartment, the default setting is 12 °C (ideal
maturing temperature). However you can set the temperature between
9 - 15 °C.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 0 - 35 °C.
23/06/11 11:52 AM