Commissioning Your Humidor; I - Connection; Description; Temperature And Relative Humidity Settings - Eurocave CC064V3 Mode D'emploi

1. Connection
Have your plug checked (presence of fuses, amps and 30 mA
circuit breaker).
Do not plug several cellars into a multi-socket.
1I. Description
A B C D
P O
A
Lighting mode
B
Door open alarm
C
Temperature zone
D
Fault sensor alarm
E
Temperature alarm
F
Carbon filter alarm
G
Validation and settings access button
H
Selection and adjustment buttons
III. Temperature and relative humidity settings
Press the key for 5 s to activate.
1
Press the key about 5 s.
The display starts to flash.
3
Press the button to validate.
The humidity level display is flashing.
7 - C
OMMISSIONING YOUR HUMIDOR
E F
N M L
5 sec.
G H I
K J
I
Lighting mode validation and access button
J
Carbon filter counter log access button
K
Standby status button
L
Threshold humidity alarm
M
Relative humidity level display
N
Hot circuit indicator light
O
Cold circuit indicator light
P
Temperatures display
2
Press the or
4
Press the or
(Temperature setting range: 65 – 85%)
5
Press the button to validate.
The temperature and humidity values read on the display are
the actual levels in the humidor; there is a small delay between
any change or modification in settings and the humidor reaching
your new values set.
The touch keys are very sensitive. There
is no need to push the keys very hard. A
simple, gentle touch is enough to register
the setting. Think to lift your finger from
the control panel between each touch.
keys to set the desired temperature.
keys to set the desired relative humidity level.
21
EN