Eurocave Classic Serie Mode D'emploi page 27

1. Connecting
Have your socket checked (presence of correct sized fuse and 30 mA circuit breaker).
Do not plug several cabinets into an adaptor.
Check your type of wine cabinet
Press the and keys at the same time.
1I-A. Description (1-temperature model V083 - V183 - V283)
A
Lighting mode
B
Open door alarm
C
Temperature zone
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys
III-A. Temperature setting
Press and hold down the
1
Press and hold down the
The display will start to flash
2
Press the or keys to set the desired temperature.
3
Press the button to confirm.
N 83V2-0511.indd 27
7 - c
ommissioning your Wine caBinet
key to power up.
key for approximately 5 secs.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
I
Lighting mode access and confirmation key
J
Charcoal filter meter access key
K
Standby key
L
Humidity level alarm
M
Relative humidity level display
N
Hot circuit indicator
O
Cold circuit indicator
P
Temperature display
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
•
The default setting is 12 °C (ideal wine maturing temperature).
However you can set the temperature between 5 - 20 °C.
•
Recommended wine maturing temperature setting range: 10 - 14 °C.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 0 - 35 °C.
27
EN
23/06/11 11:52 AM