Ii-D. Description (Multi-Temperature Model S083 - S183 - S283); Iii-D. Temperature Setting - Eurocave Classic Serie Mode D'emploi

7 - c

II-D. Description (multi-temperature model S083 - S183 - S283)

A
Lighting mode
B
Open door alarm
C
Temperature zones concerned
D
Sensor fault alarm
E
Temperature alarm
F
Charcoal filter alarm
G
Confirmation and setting access key
H
Setting and selection keys

III-D. Temperature setting

Recommended temperature setting range for the lowest temperature: 7 - 9 °C.
Recommended temperature setting range for the highest temperature: 17 - 20 °C.
Press and hold down the
1
Press and hold down the
The display will start to flash.
3
Press the button to confirm.
The right-hand display will flash.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
30
EN
N 83V2-0511.indd 30
ommissioning your Wine caBinet
key for 5 secs to power up.
key for approximately 5 secs.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
I
Lighting mode access and confirmation key
J
Charcoal filter meter access key
K
Standby key
L
Highest temperature in cabinet display
M
Hot circuit indicator
N
Cold circuit indicator
O
Lowest temperature in cabinet display
2
Press the or keys to set the desired temperature.
4
Press the or keys to set the desired relative humidity
level.
5
Press the button to confirm.
•
For the lowest temperature, the default setting is 8 °C. However you
can set the temperature between 5 - 12 °C.
•
For the highest temperature, the default setting is 18 °C.
•
However you can set the temperature between 15 - 22 °C.
N.B: in order to operate correctly, your cabinet must be
placed in a room with a temperature of 12 - 35 °C.
23/06/11 11:52 AM