5 - i
I. Reversible door
Allows you to change the direction in which your door opens. Proceed as
follows (instructions for changing a right-hand door into a left-hand door):
1
Unscrew the three screws using a "T25" Torx wrench.
2
Remove the upper hinge.
3
Carefully remove the caps using a thin blade.
4
Remove the cabinet door by opening it slightly then lifting it upwards.
5
Unscrew the door pin.
6
Carefully remove the caps using a thin blade and replace with the pin.
Reposition the cap on the opposite side.
7
Unscrew the four screws.
8
24
Fasten the catch on the opposite side of the cabinet using the screws.
EN
N 83V2-0511.indd 24
nstallating your Wine caBinet
A
Upper hinge
B
Caps
C
Caps
D
Torx screw
E
Torx screw
F
Door catch
9
Turn the door through 180°.
N.B: the door is very heavy. Take all necessary precautions so
that you do not injure yourself or drop it.
10
Replace the door on its pin.
11
Put in place the upper hinge.
12
Screw the hinge so that the door is completely parallel to the cabinet.
Check that the seal adheres well to the cabinet body (by closing the
door), to ensure that it is completely air-tight.
13
Put in place the caps.
N.B: The doors of models in the Collection range are
not reversible.
G
Lower hinge
H
Door pin
J
Door pin cap
23/06/11 11:52 AM