Malossi VESPower Notice De Montage page 15

• Red colored plastic fan with
advanced booster cooling
secondary fins (optimized
fan profile and distribution
absorption).
• Wiring dedicated to each
specific application.
• Integrated coil/ control unit.
• Voltage regulator.
As optional you can get the
additional flywheel masses,
which allow to adapt the ignition
to the own vehicle according to
its set-up, thus further increasing
the moment of inertia.
You can choose between two
versions with diff erent weight and
moment of inertia:
• Art. 1715715 (For ALL
VESPower EXCEPT Art.
5516956 and Art. 5517175)
• Art.1715716 (For ALL
VESPower EXCEPT Art.
5516956 and Art. 5517175)
15
We hope you found the above
instructions suff iciently clear.
However, if any points are not
particularly clear, please contact
us completing the special
form inserted in the "contact"
section on our Internet site
(malossistore.com). We thank
you in advance for any comments
and suggestions you may wish to
send us. So goodbye from us all
at Malossi, and please accept our
compliments. Have Fun. GOOD
LUCK and ... see you next time.
The descriptions in this
publication are not binding.
Malossi reserves the right to make
modifications, if it considers
them necessary, and does not
accept any responsibility for any
typographic or printing errors.
This publication replaces all
previous publications referring to