Malossi VESPower Notice De Montage page 11

• Fit the fan using the 4 Allen
screws countersunk and
special bushings included in
the kit (Fig. 2, part. 4).
• Re-fit the air pipe.
Art. 5516953 - 5516956
Original models WITHOUT
PARKING
• Mount the transducer
on the original bracket
(Fig. 3, part. 5).
• Place the transducer ground
cable with eyelet and the
ground cable of the wiring
under the transducer bracket
fixing nut (Fig. 3, part.
• Connect the green cable
coming out of the flywheel
to the Malossi wiring
(Fig. 3, part. 7).
• Connect the light blue cable
coming out of the transducer
to the Malossi wiring
(Fig. 3, part. 8).
• Connect the female faston of
the Malossi wiring to the green
turn off cable of the original
wiring (Fig. 3, part. 9).
11
• Connect the cables coming
from the frame with those of
the Malossi flywheel respecting
the following indications:
» white -> black
» blue -> blue
NB: the kit includes two fastons
to connect the above mentioned
cables.
6).
• The flywheel yellow cable can
be connected to the battery
charger kit (Art. 5515703)
supplied separately.
Assembly of the battery
wiring kit
• Connect the yellow cable
of the Malossi wiring to the
flywheel yellow cable (right
side).
• Remove the original regulator
(left side).
(Fig. 4)