Installation With Fixings - Phoenix Mecano RK ROSE+KRIEGER quad EV Notice D'assemblage

7. Working life

7.2.3 Installation with fixings

In all installation work, you must adhere to the specified torques for the screws used. Note the
tempering for the screws and separate information for accessories supplied. Only compliant con-
ditions will guarantee the safety and long working life of the linear shaft. Take the values from the
table in these instructions.
The linear unit is fastened with fixings 1, which are selected
and combined for the relevant application from the "Linear
components" and/or "Connection systems" catalogues
.
1
The linear unit is fastened with fixings 2, which can be
selected and combined for the relevant application from the
"Linear components" and/or "Connection systems"catalo-
gues.
2
47