1.1 Declaration of Incorporation electric cylinder LZ 70 with
three-phase or servo-motor
As set out in Machine Directive 2006/42/EC, Appx. II, 1.B for incomplete machines
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
Description and identification of the partly completed machine.
Product / manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machine Directive 2006/42/EC are applied and met:
1.1.5., 1.3., 1.3.2., 1.3.3., 1.3.4., 1.3.9., 4.1.2.3., 4.1.3., 4.3.2., 4.3.3., 4.4.1., 4.4.2.
Moreover, we declare that the special technical documents have been created according to An-
nex VII Part B.
The manufacturer declares explicitly that the incomplete machine meets all the relevant provi-
sions of the following EC directives:
2011/65/EC
The person in the community that is authorised to compile the rele-
vant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
Electro-motorised extracting and retracting of the inner profile for suitabi-
lity of a linear movement
Directive of the European Parliament and of the Council of 8th June 201
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
1. Declaration of Incorporation
35