Guidance Concept; Dimensions; Basic Lengths/Weights - Phoenix Mecano RK ROSE+KRIEGER quad EV Notice D'assemblage

6.2.2 Guidance concept

Anti-rotation guide for a guidance slide on an engineered aluminium section with lateral prismat-
ic guides.
Guidance pipe: Engineered extruded section, anodised and polished.
Spindle bearing:
®
•
quad EV 30/40: Inclined ball bearing, 2 rows
®
•
quad EV 50: Inclined and axial ball bearing
®
•
quad EV 60/80: Inclined ball bearing
Spindle bearing, floating bearing:
®
•
quad EV 30-80: Deep groove ball bearings
Slide bushing: Slide made from PA
After receiving this linear unit, check the device for possible damage and missing components.
If you find any faults, inform RK Rose+Krieger GmbH of these immediately. The linear unit is de-
livered ready for operation, but without a control system and without accessories.

6.3 Dimensions

Linear units are produced individually to length in accordance with your specification.
The width and height of this linear unit is determined from the choice of size and design and can
be taken from the Linear Components catalogue.

6.3.1 Basic lengths/weights

®
quad EV - right- or left-hand thread
Version
®
quad EV 30
®
quad EV 40
®
quad EV 50
®
quad EV 60
®
quad EV 80
* The basic weight does not include the guidance slides.
Basic length in mm
96
115
140
199
218
6. Product information
Weight in kg
Basic length* per 100 mm travel
0,310
0,705
1,445
2,083
4,300
Weight in kg
0,220
0,400
0,530
0,605
1,000
41