Ordering Guidelines; Compliance With Directives And Standards - ProMinent DULCOTEST CLE Mode D'emploi

Ordering guidelines / Directives and standards

13 Ordering guidelines

Standard
delivery • 1 CLE sensor kit with membrane cap and tensioning ring
• 1 bottle of electrolyte (100 ml)
• 1 operating instructions
• 1 screwdriver
Complete set The sensors can only be ordered as complete kits:
• CLE 3-mA-0.5 ppm
• CLE 3-mA-2 ppm
• CLE 3-mA-10 ppm
• CLE 3-mA-20 ppm
• CLE 3-mA-50 ppm
• CLE 3-mA-100 ppm
• CLE 3-DMT-5 ppm
• CLE 3-DMT-50 ppm
• CLE 2.2-4P
Spare parts
and accessories • 1 bottle of electrolyte (100 ml)
• 1 membrane cap
• assembly kit
• 2-wire signal cable (mA variant)
• Signal cable for DMT chlorine sensors (2 m)
• Signal cable for DMT chlorine sensors (5 m)
• Signal cable for DMT chlorine sensors (10 m) Order no.
• Signal cable for -4P chlorine sensors (2 m)
• Signal cable for -4P chlorine sensors (5 m)
• Signal cable for -4P chlorine sensors (10 m)

14 Compliance with directives and standards

EU directives:
International standards:
32
for DGM
for DLG III
2
(2 x 0.25 mm , Ø 4 mm)
EG-EMV RL 89/336/EWG
91/263/EWG i.d.F. 92/31/EWG
EN 50 081-1/2
EN 50 082-1/2
Order no. 792927
Order no. 792920
Order no. 792919
Order no. 1002964
Order no. 1020531
(on request)
Order no. 1005511
Order no. 1005512
Order no. 914958
Order no. 506270
Order no. 790488
Order no. 791818
Order no. 815079
Order no. 725122
Order no. 1001300
Order no. 1001301
1001302
Order no. 818455
Order no. 818456
Order no. 818470
ProMinent
®