Emerson Unimotor Serie Manuel D'installation page 3

EC DECLARATION OF CONFORMITY
We, the manufacturer:
Control Techniques Dynamics Ltd. (part of Emerson Industrial Automation)
South Way
Walworth Industrial Estate
Andover, Hampshire SP10 5AB
United Kingdom
Tel: +44 (0) 1264 387 600
Fax: +44 (0) 1264 356 561
Certify and declare under our sole responsibility that the following products:
Name
Description
+
Catalogue numbers
* maybe any number or letter indicating motor options which do not affect this DoC.
+
Added to the right hand side of these part numbers there maybe an additional '-' followed by 4 letters indicating that
the motor is a 'special' or has a gearbox is fitted.
comply with the essential requirements and provisions of the Low Voltage Directive
2006/95/EC and of the EMC Directive 2004/108/EC based on the following specifications
applied:
EU Harmonised Standards under directive 2006/95/EC: EN 60034-1:2004 , EN 60034-
5:2001, EN 60034-6:1993, EN 60034-7:1993, EN 60034-8:2007, EN 60034-14:2004, EN
60204-1:2006
EU Harmonised Standards under directive 2004/108/EC: EN 61000-6-2:2005, EN 61000 -
6-4:2007
Year of CE Marking: 2010
Manufacturer:
Signature
Name: Keith Hedges
Position: Managing director
Date: 23rd June 2010
Unimotor FM (Fan Blown)
AC Brushless Permanent Magnet Electric Servo Motors
075U4***************, 095U4***************, 115U4***************,
142U4*************** and 190U4***************