We the Manufacturers;
Control Techniques Dynamics Limited. (part of the Emerson Industrial Group)
South Way,
Walworth Industrial Estate,
Andover, Hampshire, SP10 5AB,
United Kingdom.
Tel: +44 (0) 1264 387600
Fax: +44 (0) 1264 356561
Declare under our sole responsibility that the Brushless Permanent Magnet Servo Motors described below
comply with applicable Health and Safety Requirements of Annex I of the Low Voltage Directive 2006/95/EC and
Annex II of the ATEX Directive 94/9/EC and the EMC Directive 2004/108/EC. Confidential technical documentation
has been compiled according to the specific requirements of each directive:
Description of product: Brushless Permanent Magnet Servo Motors Types 480V U2, UM/SL; 220V E2, EZ.
Standard Rating: Frame Size 075 to 250, 480V AC, 11.6 kW maximum, Speed 0-6000 RPM, Thermal
Classification: Delta 100°C.
ATEX Rating: Unimotor UM and fm frame size 075 to 190, 480V AC, 11.6 kW maximum, Speed 0-3000 RPM,
Thermal Classification: Delta 100°C.
The following standards have either been referred to or have been complied with in part or in full:
Reference
EN 60034-1:2004
Rotating electrical machines – Part 1: Rating and performance
EN 60034-5:2001
Rotating electrical machines – Part 5: IP Code
EN 60034-6:1993
Rotating electrical machines – Part 6: IC Rating
EN 60034-7:1993
Rotating electrical machines – Part 7: IM Rating
EN 60034-8:2007
Rotating electrical machines – Part 8: Terminal markings and direction of rotation
EN 60034-14:2004
Rotating electrical machines – Part 14: Mechanical vibration
EN 60204-1:2006
Safety of machinery – Electrical equipment of machines Part1: General requirements
EN 60079-0:2006
Electrical apparatus for explosive gas atmospheres – general requirements
EN 60079-2:2007
Electrical apparatus for explosive gas atmospheres – pressurised enclosures "p"
EN 61241-0:2006
Electrical apparatus for use in the presence of combustible dust – general requirements
EN 61241-1:2004
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
Control Techniques Dynamics operate a quality management system that complies with the requirements of our BS EN ISO 9001:2008 Registered Firm
Approval No.FM30610
EC DECLARATION OF CONFORMITY
Atex Gas
Ex II 3 G Ex pz T3 (0<Ta<40°C)
Atex Dust
Ex II 3 D Ex tD A22 IP65 T 200°C
BSI 09 ATEX 546579X
BSI 09 ATEX 546579X
Title