Stihl RE 110 Notice D'emploi page 38

Masquer les pouces Voir aussi pour RE 110:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Before troubleshooting, switch off the pressure washer and disconnect the unit from the power supply. Relieve all system
Condition
Detergent is not being drawn
in.
The connections of the
pressure washer, high-
pressure hose, spray gun or
spray lance are stiff.
36
pressure by pulling the trigger switch. Lock the spray gun trigger.
Possible Cause
The nozzle is worn.
The detergent container is empty.
The nozzle of the detergent spray set is
blocked.
The gaskets of the connections have not
been greased.
Remedy
► Insert a new nozzle.
► Fill the container with detergent.
► Clean nozzle of the detergent spray set.
► Grease the gaskets. @ 16.3
17 Troubleshooting Guide
0458-620-8221-A

Publicité

Chapitres

Table des Matières
loading

Table des Matières