Assembling The Pressure Washer; Assembling Parts And Accessories; Adjusting The Handle - Stihl RE 130 PLUS Notice D'emploi

English

8 Assembling the Pressure Washer

8.1

Assembling Parts and Accessories

WARNING
To reduce the risk of severe injury from high-pressure spray,
always switch off the pressure washer, shut off the water
supply, relieve any remaining pressure in the system and
lock the spray gun trigger before attempting to assemble the
pressure washer or spray attachment.
Crank Handle
1
► Push the crank handle (1) into the recess (2).
The crank handle (1) audibly engages.
Detergent Spray Set
16
► Insert the detergent spray set (1).
Nozzles and cleaning needle
1
► Open the cover (1).
► Insert the fan-jet nozzle (2) and rotary-jet nozzle (3).
► Insert the cleaning needle (4).
8.2

Adjusting the Handle

8.2.1 Pulling out the Handle
To pull out the handle:
1
► Press the release button (1) and pull out the handle (2).
1
► Release the release button (1) and pull out the handle (2)
until it audibly engages.
8 Assembling the Pressure Washer
4
2
3
2
0458-836-8221-A