Snap-On ECO DUAL GAS Manuel D'instructions page 73

Reposition the transparent protection by screwing the two screws. Press ENTER to continue,
the following screen will be displayed:
Type the RESET CODE from the spare pair filters box, then press ENTER to continue, the
following screen will be displayed:
RESET ANALYZER FILTER COUNTER is now successfully completed, press ENTER to exit.
NOTE: Failure to replace the filters could result in oil damage to the analyzer and the
voiding of the warranty.
INSTRUCTIONS MANUAL
CHANGE ANALYZER FILTER
Reposition the transparent
protection by screwing the two
screws.
Press ENTER to continue
RESET ANALYSER COUNTER
enter filter code
____
Code correct
Press ENTER
73
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
DD/MM/YY XX:XX PM
ENTER