Snap-On ECO DUAL GAS Manuel D'instructions page 37

A summary of the amount of gas recovered, oil recovered, minutes of the vacuum phase and
the amount of gas charged is displayed. Press the symbol
Automatic procedure completed successfully, press ENTER to return to the main page.
NOTE: The automatic procedure may be run even if the A/C system is empty. In this case the
machine will begin with the vacuum phase.
NOTE: near the end of the charge could be displayed the following alarm message:
The SLOW CHARGE alarm occurs when the tank pressure and the system pressure equalize
(due to low pressure, excessive system temperatures, etc.). Check connections then press
ENTER to continue, or press ESC to exit.
INSTRUCTIONS MANUAL
DD/MM/YY XX:XX PM
END of procedure
Gas recovered: 41 g
Oil recovered: 0 ml
Vacuum time: 2 min
Gas charged: 200 g
Press ENTER to continue
DD/MM/YY XX:XX PM
SLOW CHARGE
Check connections
Press ENTER to continue
Press ESC to exit
37
ENTER
for printing (Optional)
ESC
ENTER