Vacuum - Snap-On ECO DUAL GAS Manuel D'instructions

You are asked to enter the vehicle's PLATE, the FRAME NUMBER, the KM/Miles and the
Operator Code. Press ENTER.
A summary of the amount of gas recovered and oil recovered, is displayed.
Press the symbol
Manual recovery procedure completed successfully, press ENTER to return to the manual
operation page.

VACUUM

Use the quick-connect couplings to connect the hoses to the A/C system, bearing in mind that
BLUE must be connected to the low pressure side and RED to high pressure. If the system is
equipped with a single quick-connect coupling for high or low pressure, connect only the
relative hose.
From the MANUAL PROCEDURE, select VACUUM.
The following screen will be displayed:
Use the KEYPAD to insert the new value of the VACUUM TIME
confirm, ESC to return back.
INSTRUCTIONS MANUAL
END of procedure
Gas recovered: 121 g
Oil recovered:
Press ENTER to continue
for printing
RECOVERY/RECYCLE
VACUUM
FLUSHING HOSES
CHARGE
VACUUM
VACUUM TIME
DD/MM/YY XX:XX PM
0 ml
ENTER
DD/MM/YY XX:XX PM
ESC
DD/MM/YY XX:XX PM
ESC
25
ENTER
41
, press ENTER to