Snap-On ECO DUAL GAS Manuel D'instructions page 36

Disconnect HP coupling. Start A/C system with LP coupling connected, press ENTER
The A/C system will recover the refrigerant into the service hoses, then the following screen will
be displayed:
Disconnect LP coupling from A/C system, then press ENTER to continue:
The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
You are asked to enter the vehicle's PLATE, the FRAME NUMBER, the KM/Miles and the
Operator Code. Press ENTER.
INSTRUCTIONS MANUAL
Disconnect HP coupling Start A/C system with LP
coupling connected end press ENTER
Disconnect LP coupling from A/C system end press ENTER
EMPTY HOSES
EMPTY HOSES
Hoses pressure
Plate:
-
VIN:
-
Miles:
-
Operator code:
123456
CHARGE AMOUNT
36
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
4.0bar
STOP
DD/MM/YY XX:XX PM
ENTER
DATABASE
ENTER