Snap-On ECO DUAL GAS Manuel D'instructions page 29

Press ENTER to proceed with QUICKSETUP, the user will be guided through the following
steps:
 Language
 Measure units
 License plate recording
 Date and time
 Setup header print
 Vacuum settings
 Leak check test
 Tank filling
Follow the instructions displayed. At the end of the procedure, press ENTER to print a
summary report of the guided procedure. Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be displayed again the next time the
machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the menu of the same name
under SETUP.
INSTRUCTIONS MANUAL
QUICKSETUP DD/MM/YY XX:XX PM
QUICKSETUP
Press ENTER to continue
Press ESC to exit
29
ESC
ENTER