Snap-On ECO DUAL GAS Manuel D'instructions page 46

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
A summary of the amount gas of the CHARGE phase is displayed.
Press the symbol
CHARGE procedure completed successfully, press ENTER to return to the manual procedure
page.
NOTE: near the end of the charge could be displayed the following alarm message:
The SLOW CHARGE alarm occurs when the tank pressure and the system pressure equalize
(due to low pressure, excessive system temperatures, etc.). Check connections then press
ENTER to continue, or press ESC to exit.
CHARGE (for R1234yf)
From the MANUAL PROCEDURE, select CHARGE, the following screen will be displayed:
INSTRUCTIONS MANUAL
EMPTY HOSES
EMPTY HOSES
Hoses pressure
END of procedure
Gas charged:
Press ENTER to continue
for printing (Optional)
SLOW CHARGE
Check connections
Press ENTER to continue
Press ESC to exit
DD/MM/YY XX:XX PM
4.0bar
STOP
DD/MM/YY XX:XX PM
200 g
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
46

Publicité

Table des Matières
loading

Table des Matières