Empty Hoses - Snap-On ECO DUAL GAS Manuel D'instructions

If the refrigerant is PURE the machine will display the following screen
Press the symbol
GAS ANALYSIS procedure is now successfully completed, press PRINTER to print the receipt
of the procedure, press ENTER to return to exit.
NOTE: If the refrigerant is CONTAMINATED the machine will ask the connect an external
recovery unit in order to remove the contaminated refrigerant from machine. In order to
complete the cleaning of internal circuit the machine will run 10 minutes of vacuum.

EMPTY HOSES

From MAINTENANCE, select EMPTY HOSES, the following screen will be displayed:
INSTRUCTIONS MANUAL
GAS ANALYSIS
REFRIGERANT SAMPLE
R1234yf:
R134a:
R22:
HC:
Air:
GAS ANALYSIS OK
Press ENTER to continue
for printing
EMPTY HOSES
Make sure that HP and LP couplings are
Disconnected from A/C system
DD/MM/YY XX:XX PM
45 %
DD/MM/YY XX:XX PM
TEST 1
100.0 %
000.0 %
000.0 %
000.0 %
000.0 %
ENTER
DD/MM/YY XX:XX PM
ESC
ENTER
62