Setup; Release Refrigerant Scale; Lock Refrigerant Scale - Snap-On ECO DUAL GAS Manuel D'instructions

SETUP

The machine is supplied fully assembled and tested.
Referring to Figure 3 remove the protections under the refrigerant scales as follows:

RELEASE REFRIGERANT SCALE

- In order to remove the protections under the refrigerant scale the locking knob (ref.1a
ref.1b, Fig.3) has to be unscrewed
- Connect the machine to the electrical supply and switch it on
- Check if the value of refrigerant scale is correct.

LOCK REFRIGERANT SCALE

NOTE: in the event that the equipment has to be transported, the refrigerant tank scale should
be locked as follows:
1. Switch the machine on.
2. Screwed the knob (ref.1a, ref.1b, Fig.3) until the display signals ZERO availability.
INSTRUCTIONS MANUAL
14