Device Options; General Information; Selecting Device Options; Configuration - Würth 0510 955 607 Mode D'emploi

Device options

General informa- The device options allow the following to be configured:
tion
-
-
-
-
-
-
Selecting device
options

Configuration

The following parameters can be configured to create an individual standard:
Charger lead length:
-
-
Initial values:
-
-
-
-
70
Language
Selection of language for user guide
Graphic display contrast
Configuration
an individual standard may be set
Factory setting
to restore all device options to the factory settings
Activate/deactivate Expert mode
Info
provides information on the
hardware and software version
total Ah charged
total operating time
Use the up/down keys to select the device options
1
CAUTION! Risk of damage when selecting and using individual charger lead
lengths. The user accepts full responsibility for shortening the charger leads sup-
plied and making the appropriate settings to reflect the individual charger lead
lengths. The manufacturer shall not be held liable for any damage arising from
such actions.
1 m - 10 m, adjustable in 0.5 m stages
The following lengths may be requested in the scope of supply: 2.5 m, 5 m and 10 m
Start mode (charging/buffering (trickle) mode)
Battery capacity (3 – 350 Ah)
Battery type (WET, GEL and AGM)
Voltage selection