Charging Mode; Charging The Battery - Würth 0510 955 607 Mode D'emploi

Charging mode

General informa- Charging mode is used for:
tion
-
-
Charging the bat-
tery
1
4
Charging or conservation charging with the battery either fitted or removed
Charging while vehicle consumers are switched on
CAUTION! Risk of damage when attempting to charge a faulty battery. Before
charging, ensure that the battery to be charged is fully functional.
Plug in charger mains plug
Use the Menu key to select the 'Ah' or 'Battery type' setting.
2
Use the up/down keys to enter the required value (e.g. 100
3
Ah or 'Wet' battery type).
Connect battery - the de-energised charger leads mean there are no sparks when
connecting to the battery, even if the charger is already connected to the mains supply.
- Connect the red charger lead to the positive pole (+) on the battery
- Connect the black charger lead to the negative pole (-) on the battery
CAUTION! Risk of damage if the wrong voltage is set. Always ensure that the cor-
rect battery voltage is set.
Set the correct battery voltage using the up/down keys (6 V /
5
12 V / 24 V).
Charging mode is automatically started af-
ter the charger is connected to the mains.
The charger automatically identifies the
battery, e.g. 12 V, and starts the charging
process after 5 seconds.
If the battery voltage is not correctly identi-
fied (e.g. in the event of a deeply dischar-
ged battery), you have 5 seconds to enter
the correct battery voltage, as follows:
59