Charging Errors - Würth 0510 955 607 Mode D'emploi

Charging errors

No. 31: Too many Ah charged, too few Ah set
Remedy:
-
-
-
No. 32: Optional external temperature sensor has tripped due to undertemperature
Remedy:
-
No. 33: Optional external temperature sensor has tripped due to overtemperature
Remedy:
-
No. 34: Battery voltage set too high
Remedy:
-
No. 35: Voltage below target voltage after 2 h - Refresh mode in analysis phase
Remedy:
-
-
No. 36: Cell short circuit
Remedy:
-
-
No. 37: Conservation charge current too high
74
Set Ah to correct value
Check for parallel consumers (car radio, etc.)
Replace battery if it appears to be faulty
Charge the battery in a more suitable area
Allow battery to cool, or charge battery in a more suitable area
Set the correct battery voltage
Check for parallel consumers (car radio, etc.)
Replace battery if it appears to be faulty
Check for parallel consumers (car radio, etc.)
Replace battery if it appears to be faulty
No. 30: Timeout in the corresponding
charging phase
Remedy:
- Set Ah to correct value
- Check for parallel consumers (car ra-
dio, etc.)
- Battery temperature too high