Control Elements And Connections; General Remarks; Control Panel; Plugging In Options - Würth 0510 955 607 Mode D'emploi

Control elements and connections

General remarks

Control panel

(1)
(4)
Plugging in op-
tions
52
NOTE! As a result of firmware updates, you may find that there are functions
available on your unit that are not described in these operating instructions or vice
versa. Certain illustrations may also differ slightly from the actual control elements
on your device. However, these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
(2) (3)
Stop/Start key
- For interrupting and resuming charging
- Confirming selections, e.g. after the charging voltage has been selected from 6,
12 or 24 V using the Up/Down keys
NOTE! Danger of damage to charger and accessories. Only plug in options and
system add-ons when the mains plug is unplugged and the charging cables are
disconnected from the battery.
No. Function
(1) Graphic display
(2) Menu key
- Select the desired setting, e.g. Ah
(3) Up/Down keys
- Select the desired operating mo-
de, e.g. 'Charging' or 'Battery
changing'
- Alter the setting that has been se-
lected by the Menu key (2)
- After connecting to a new battery:
ability to manually select the
charging voltage from 6, 12 or 24
V
(4)