Spare Parts, Add-Ons And Conversions; Maintenance; Damage To The Product; Exclusion From Liability - Kessel Minilift F Instructions D'installation, D'utilisation Et D'entretien

If no other provisions have been made, the warranty period applies to the first 12 months after initial start-up or to
a max. of 24 months after the delivery date. Other agreements must be made in writing in the order confirmation.
These agreements will remain valid at least until the agreed warranty period of the product has expired.
1.5.1

Spare parts, add-ons and conversions

Only original spare parts as supplied by the manufacturer may be used for repairs, replacements, add-ons and
conversions. Only these parts guarantee a long working life and the highest level of safety. These parts have been
specially designed for our products. Self-made add-ons and conversions or the use of non-original spare parts
can seriously damage the product and/or injure personnel.
1.5.2

Maintenance

The prescribed maintenance and inspection work should be carried out regularly. This work may only be carried
out by qualified, trained and authorized personnel. The maintenance and inspection log supplied must be properly
updated. This enables you to monitor the status of inspections and maintenance work. Quick repairs not listed in
this operation and maintenance manual and all types of repair work may only be performed by the manufacturer
and its authorized service centres.
1.5.3

Damage to the product

Damage as well as malfunctions that endanger safety must be eliminated immediately by authorized personnel.
The product should only be operated if it is in proper working order. During the agreed warranty period, the pro-
duct may only be repaired by the manufacturer or an authorized service workshop! The manufacturer reserves the
right to recall the damaged product to the factory for inspection!
1.5.4

Exclusion from liability

No liability will be assumed for product damage if one or more of the following points apply:
• Incorrect design and on our part due to faulty and/or incorrect information provided by the operator or
customer
• Non-compliance with the safety instructions, the regulations and the requirements set forth by German law
and this operating and maintenance manual
• Incorrect storage and transport
• Improper assembly/dismantling
• Improper maintenance
• Unqualified repairs
• Faulty construction site and/or construction work
• Chemical, electrochemical and electrical influences
• Wear
In case of a power failure or another technical failure, by which a proper operation of the pump is no longer
guaranteed, it is essential to take care that damages by an overflow of the pump sump are prevented securely, for
example, by installing a mains-independent alarm or other appropriate protective measures.
This means the manufacturer's liability excludes all liability for personal, material or financial injury.
1.5.5

Customer service

KESSEL AG
Bahnhofstarsse 31
D-85101 Lenting
Telefon +49 (0) 8456/27-462
Telefax +49 (0) 8456/27-173
E-Mail: kundendienst@kessel.de
Homepage: www.kessel.de
2016/04
GENERAL
25/120