Specifications; Process Characteristics - Burkert 8041 Manuel Utilisateur

Masquer les pouces Voir aussi pour 8041:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.1 PROCESS CHARACTERISTICS

Flow measurement
- Type of measurement
- Measuring range
- Linearity
- Repeatability
- Accuracy
(for M.V. from 1 to 10 m/s and -15 °C < medium T° with Stst. sensor < 130 °C
or 0 °C < medium T° with PVDF sensor < 80 °C)
* In the reference conditions, where: fluid = water, water and ambient temperatures = 20 °C,
upstream and downstream distances complied with, pipe dimensions adapted.
M.V. = measured value
General data
- Pressure class
- Fluid temperature
- with stainless steel sensor
- with PVDF sensor
- Minimum fluid conductivity
- Housing and cover material
- with stainless steel sensor
- with PVDF sensor
- Material of screws / seal / cable glands
- Materials in contact with the fluid
- Sensor armature
- Gaskets
- Electrodes
- Armature of electrodes
(stainless steel sensor)
- Earth ring (PVDF sensor)
8041

SPECIFICATIONS

Electromagnetic measurement
0,2 to 10 m/s
+/- (1% of the M.V. + 0.1% of the full scale)
0.25% of the M.V.
≤ +/-2% of the M.V., with calibration on site (for ex.
teach-in with a 8025 transmitter)
≤ +/-4% of the M.V., with standard K factor*.
Depends on the temperature and fitting
material (see 4.1.1)
-15 °C up to 150 °C (depending on fitting)
0 °C up to 80 °C (depending on fitting)
20 µS/cm
PPA, glass fiber reinforced
PC, glass fiber reinforced
stainless steel / EPDM / PA
stainless steel 316L (DIN 1.4404)
or PVDF
FKM (FDA agreement)
stainless steel 316L (DIN 1.4404)
PEEK (FDA agreement)
stainless steel 316L (DIN 1.4404)
33

Publicité

Table des Matières
loading

Table des Matières