Operation; Switch-On And Switch-Off; Dimming - Waldmann ROCIA.planar RPD Mode D'emploi

Operation

6. Operation
6.1

Switch-on and switch-off

Switching the luminaire on and off by
pressing the key
When the power supply is interrupted, the
state of the luminaire (On/Off) is stored.
Upon restoring the power supply, the lumi-
naire will be switched automatically to the
previously stored state.
Fig. 5: Key.
X To switch the luminaire on and off, press
the key A on the top side of the lumi-
naire head, see Fig. 5.
6.2

Dimming

Prerequisite: Luminaire in D version or
DS version.
X To switch to the dimming mode, press
the key A and keep it depressed for
10 s, see Fig. 5.
Whether switching to the dimming
mode was successful, is indicated by
a flash of the luminaire.
X Press the key and keep it depressed.
After about one second, the luminaire
will change its brightness.
X To change the dimming direction, press
A
the key again and keep it depressed.
This will save the set brightness. The
next time the luminaire is switched on,
the brightness saved last will be set.
X To leave the dimming mode, press the
key and keep it depressed for 10 s.
Whether leaving the dimming mode
was successful, is indicated by a flash
of the luminaire. The luminaire is oper-
ated at the maximum power.
ENG
23