Operation; Switch-On And Switch-Off; Dimming - Waldmann ROCIA.focus RFD Mode D'emploi

Operation

6. Operation
6.1

Switch-on and switch-off

Switching the luminaire on and off by
pressing the key
When the power supply is interrupted, the
state of the luminaire (On/Off) is stored.
Upon restoring the power supply, the lumi-
naire will be switched automatically to the
previously stored state.
Fig. 5: Key.
X To switch the luminaire on and off, press
the key A on the top side of the lumi-
naire head, see Fig. 5.
Switching the luminaire on and off with-
out pressing the key
The luminaire will switch on when it is sup-
plied with power.
6.2

Dimming

N OT E : T h e l u m i n a i r e m o d e l s
RFJ 600/850/(x)(x) are not provided
with a dimming function.
X To switch to the dimming mode, press
the key A and keep it depressed for
10s, see Fig. 5.
Whether switching to the dimming
mode was successful, is indicated by
a flash of the luminaire.
X Press the key and keep it depressed.
After about one second, the luminaire
will change its brightness.
A
X To change the dimming direction, press
the key again and keep it depressed.
This will save the set brightness. The
next time the luminaire is switched on,
the brightness saved last will be set.
X To leave the dimming mode, press the
key and keep it depressed for 10s.
Whether leaving the dimming mode
was successful, is indicated by a flash
of the luminaire. The luminaire is oper-
ated at the maximum power.
ENG
23