Connecting The Luminaire With Free Strands To The 24V Supply Voltage (Selv) - Waldmann ROCIA.planar RPD Mode D'emploi

ENG
5.2 Connecting the luminaire
with free strands to the 24V
supply voltage (SELV)
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Connection by a skilled electrician
only.
X Operate the luminaire at safety
extra low voltage (SELV) only.
X USA and Canada: This device
must be connected to a class 2
power supply.
NOTICE
Material damage caused by ingress
of moisture.
Damage or destruction of the luminaire.
X Pass the connecting cable through
a cable gland that corresponds to
the degree of protection of the
luminaire.
1
+
No. Assignment
1 DC +
2
DC -
Tab. 2: Assignment of the wires
22
2
-
NOTE: Please observe the wire assign-
ment.
X Connect both wires to a suitable power
supply.
Mounting