Accessories; Technical Data - Truma DuoComfort Mode D'emploi

pressure section every time a
cylinder or hose is replaced.
In particular, the screw fittings
on the gas cylinder valve and on
the changeover valve should be
checked for leaks with the proper
tools, such as a leak-finder spray
according to DIN EN 14291.

Accessories

High-pressure hoses
(with hose rupture protection)
see Page 67 – 68
1.5-metre connection hose
for connecting external
gas cylinders (G.5;
part no. 50020-61300)
Replacement seals
for high-pressure hoses
(G.13 and M20 x 1,5;
part no. 50020-76300)
16
EisEx regulator heating
(part no. 53101-01)
Remote indicator
(including EisEx)
shows the removal status from
inside the vehicle.
(part no. 50211-01)
Elbow union 90 °
(part no. 50020-56000)
Additional kit
required when gas cylinders are
more than 100 cm apart
(part no. 50020-61100)
Gas remote switch
for shutting off the gas supply
from the vehicle interior
GS 8 (part no. 57014-01)
GS 10 (part no. 57024-01)
Screw aid
(part no. 50020-61500)
Gas filter
suitable for all wall-mounted
changeover valves with a
M20 x 1.5 inlet screw joint (male
thread – G.13). Install upstream
of the changeover valve.
(part no. 50600-01)

Technical data

determined in accordance with
EN 16129:2013 and Truma test
conditions
Type of gas
Liquid gas (propane / butane)
Admission pressure
0.95 – 16 bar
Output pressure
0.3 – 0.9 bar
Nominal changeover
pressure (p )
di
750 mbar
Valve inlet
Male thread M20 x 1.5 (G.13)