Initial Setup - Hillrom Yellofins Apex Mode D'emploi

INSTRUCTIONS FOR USE
Boot release lever
Strap
Stirrup pad
3.2.2

Initial Setup

1. Follow facility-approved procedures, or consult the attending surgeon to determine
if the patient has any conditions that contraindicate the use of the Yellofins Apexor
that limit positioning the patient.
The Yellofins Apexis labeled to indicate the patient left and right sides.
2. Place the rail clamps on the rail of the surgical table. Place the rail clamps adjacent
to the patient's hip joint.
3. Remove the Yellofins Apexfrom the storage cart, cabinet, or table.
4. Grasp and firmly squeeze the lithotomy handle. Make sure that the blade mount is
parallel to the main support tube.
5. Hold the Yellofins Apexso that it is oriented vertically with the blade mount towards
the floor.
Document Number: 80025141
Version G
Page 17
Issue Date: 26 November 2020
Ref Blank Template: 80025117 Ver. F