Replace The Stirrup Pad - Hillrom Yellofins Apex Mode D'emploi

INSTRUCTIONS FOR USE
3.6.4

Replace the Stirrup Pad

Remove the Stirrup Pad:
1. Remove the button hole fasteners from the studs on the stirrup
boot.
2. Remove the stirrup pad from the toe of the stirrup boot.
3. Pull the lateral (longer) peak of the stirrup boot to remove the
stirrup pad.
Install the Stirrup Pad
WARNING:
Do not install a pad that is not approved for use with the Yellofins Apex. Patient
injury or equipment damage can occur.
Document Number: 80025141
Version G
Page 34
Issue Date: 26 November 2020
Ref Blank Template: 80025117 Ver. F