Programming Transmitters/Channels; Programming Further Transmitters/Channels; Deleting Of Transmitters/Channels; Intermediate Positions - Selve SE Plus-RC Mode D'emploi

iveo initial operation/Setting by radio

6.2. Programming transmitters/channels

6.2.1. Programming further transmitters/channels

Press the PROG button of a programmed transmitter/channel for 3 seconds (wait for
confirmation run from the motor). The receiver is now in programme mode for 1 minute.
Press (1 sec.) the PROG button of the new transmitter/channel. The new transmitter/
channel has now been programmed.
Programmed
transmitter/channel
➧
3 s

6.2.2. Deleting of transmitters/channels

Press the PROG button of a programmed transmitter/channel for 3 seconds (wait for
confirmation run from the motor). The receiver is now in programme mode for 1 minute.
Press (1 sec.) the PROG button of the transmitter/channel you wish to delete. The
transmitter/channel has now been deleted.
Programmed
transmitter/channel
➧
3 s

6.3. Intermediate positions

For setting and calling the intermediate positions, see the transmitter instructions.
New
transmitter/channel
1 s
Transmitter/channel
to be deleted
1 s
63
GB
GB