User; Savings; Device Information - clage DSX Touch Mode D'emploi

DSX TOUCH
2. How to use
Note: Ensure that no one can be injured by the elevated temperatures and that
the installation can withstand the strain.
The exiting water and the tap become very hot! The water steam should not be
EN
inhaled.
The Eco mode will be deactivated by this function and must be set again after a
thermal treatment process.

User

Up to eight users can enter their names with up to ten letters and select their own
profile image. This appears together with the first three letters of the name in the main
control.
In the main control, every user can set up and save his own desired temperatures for
the different applications.
By tapping on the symbol you can delete a user profile.

Savings

Here, you can determine the parameters for the costs in the consumption statistics and
define your own savings targets. You can select a currency symbol under "Settings".
Electricity Price (€/kWh): Indicate the electricity price from your own electricity com-
pany.
Water Price (€/m³): Indicate the water price from your own water company.
Savings Target: A savings target can be defined in € / day and activated or deacti-
vated here. At the beginning of every month, an animated graph appears in the main
control with visualization about whether or not the savings target has been reached for
the last month.
Savings target in standby-display: A scale with ten green points appears in the
standby-display 24 hours after setting up a savings target. Those points visualizes
whether the savings target has been achieved in the last 28 days. If 28 days have not
elapsed since the savings target has been setup, the consumption data are extrapolat-
ed. The green points in the scale of the standby display will gradually disappear if the
defined savings goal has been exceeded. Per every 10% exceedance, one green point
will be turned off. The scale will be updated every 24 hours.
Reaching or failing to reach the savings target during the last twelve months can be
tracked in the statistics.
ECO Settings: The Eco mode can be enabled or disabled. If it is enabled, the outlet
temperatures are limited to an energy-efficient value.
( handwash = 35 °C, shower = 38 °C, bath = 42 °C, hot water = 48 °C).
Additionally the water flow is limited to 8 l/min.

Device Information

The current status and appliance data is listed here. Tap on or to scroll through
the different information values.
22