Before Use - Briteq BT-NODE28 Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this Briteq
please read these operating instructions very carefully before you start using this unit.
FEATURES
 The perfect all-in-one ArtNet NODE solution with 8 highly configurable DMX ports.
 The 8 DMX ports can all be configured as in or outputs:
 Configured as input: normal or backup mode
 Configured as output: single, LTP, HTP, RDM or zero mode
 Multiple pre-defined routing options (modes) available:
 4 DMX inputs with 4 local clone outputs DMX and ArtNet output
 8 DMX outputs from ArtNet input, with "Backup line" possibilities
 Different merger combinations in both directions:
 Combine DMX in + ArNet universe to Artnet or a physical DMX output (LTP or HTP)
 Combine 2 DMX inputs to ArtNet (LTP or HTP)
 Multiple mode DMX splitter modes:
 One 1 to 7 splitter: 1 DMX input to 7 isolated DMX outputs
 Two individual 1 to 3 splitters: each with 1 DMX input to 3 isolated DMX outputs
 On top of the pre-defined modes you can also store all your personal settings and routing options to the
different user memories.
 100% electrical isolation between all in/outputs: problems on 1 port will not influence the other ports.
 Easy setup with OLED LCD display
 Frame rate of each port can be adapted from 10ms to 40ms to increase compatibility while connecting
"slow" DMX-devices to "fast" DMX-controllers.
 RDM compatible!
 All DMX ports are equipped with 3pin or 5pin XLR-connectors (both versions available)
 Two 10/100Mbps Ethernet ports (Neutrik RJ45 Ethercon connectors)
 To increase reliability the built-in Ethernet switch has an automatic bypass function to make sure that
the network stays fully operational in case of hardware failure.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
 To protect the environment, please try to recycle the packing material as much as possible.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 BT-NODE28
 Power cable
BRITEQ
®
®
product. To take full advantage of all possibilities and for your own safety,
1/66
OPERATION MANUAL
BT-NODE28