Briteq BT-NODE28 Mode D'emploi page 15

ENGLISH
ArtNet universe 3
ArtNet universe 4
ArtNet universe 5
ArtNet universe 6
ArtNet universe 7
8DMX TO RJ45 – RJ45 TO 8DMX MODE
This mode makes it possible to replace 8 separarate DMX-cables by one Ethernet cable. You can easily
transport 8 DMX universes over a simple Ethernet cable, up to 100m length! This mode can only be used
with two BT-NODE28 connected directly to eachther using a good quality CAT5e (minimum) Ethernet cable.
Very simple to use, no further configurations needed.
Ethernet Thru
Preset : 8DMX to RJ45
1 – 2 – 3 – 4 – 5 – 6 – 7 – 8
Important note: The network configuration set in the two BT-NODE28 are for direct connection only. To use
it in existing network use 8DMX to Art-Net and Art-Net to 8DMX with a correct network configuration.
SPECIFICATIONS
Mains Input:
Power consumption:
Power connection:
DMX connections:
Ethernet connections:
Size:
Weight:
You can download the latest version of this user manual on our website: www.briteq-lighting.com
BRITEQ
®
Every information is subject to change without prior notice
AC 100~240V, 50/60Hz
7 Watt
100V – 240V IEC inlet with fuse holder
8x 3pin-XLR or 5pin-XLR female
2x Neutrik RJ45 Ethercon (10/100Mbps)
483 x 44 x 150 mm (19" / 1U)
2.1 kg
13/66
OPERATION MANUAL
DMX Port 4
DMX Port 5
DMX Port 6
DMX Port 7
DMX Port 8
Ethernet In
Preset : RJ45 to 8DMX
1 – 2 – 3 – 4 – 5 – 6 – 7 – 8
BT-NODE28