Briteq BT-NODE28 Mode D'emploi page 8

ENGLISH
MAIN MENU
The main menu contains several sub menu's, below we explain each option in detail and how you should
use it.
1. RENAME DEVICE
Set the device name by pressing Menu and ▲/▼ to select [Rename Device]. Press [ENTER] to rename the
device. Use ▲/▼ to change letter position, then [ENTER] to edit the selected letter.
This is the available character set for each letter in the device name:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqrstuvwxyz!"#$%&'()*+,-./0123456789:;<=>?@
After the desired name is written, go with ▲/▼ to ["enter"] on the screen and press [ENTER].
The Device name is now set.
2. SET IP ADDRESS
Set the device IP-address by pressing [MENU] and ▲/▼ to select [Set IP Address]. Press [ENTER] to set
the device IP address. Use ▲/▼ to change the selected block of the IP Address, then [ENTER] to edit the
selected block (from 0 to 255).
After the desired IP-address is entered, go with ▲/▼ to ["enter"] on the screen and press [ENTER].
The Device IP address is now set.
3. SET NETMASK
Set the device netmask by pressing [MENU] and ▲/▼ to enter [Set Netmask]. Press [ENTER] to set the
device netmask. Use ▲/▼ to select netmask you want, then press [ENTER] to confirm.
A. 255.000.000.000
B. 255.255.000.000
C. 255.255.255.000
The Device netmask is now set.
4. SET DMX PORT
The 8 DMX-ports should be set one by one, so first choose the desired DMX-port from the list:
Press [ENTER] to edit the selected DMX Port:
BRITEQ
®
6/66
OPERATION MANUAL
BT-NODE28