Briteq BT-NODE28 Mode D'emploi page 12

ENGLISH
SPLITTER MODE
There are different ways to use the BT-NODE 28 as a splitter by loading one of the factory presets:
DMX Split 1>7
The BT-NODE28 is now a DMX splitter with 7 isolated DMX outputs:

DMX port 1 is the input

DMX ports 2 to 8 are the outputs.
The signal coming from the input port 1 is duplicated to the 7 outputs ports. No IP configuration or network
cable needed for this configuration.
POWER
DMX Split 2x 1>3
The BT-NODE28 is now a DMX splitter with two times 1 input and 3 isolated DMX outputs:
Splitter 1:

DMX port 1 is the input

DMX port 2 to 4 are the outputs
Splitter 2:

DMX port 5 is the input

DMX port 6 to 8 are the outputs
No IP configuration or network cable needed for this configuration.
POWER
BRITEQ
®
ETH IN ETH OUT DMX 1
ETH IN ETH OUT DMX 1
10/66
OPERATION MANUAL
DMX2 DMX3 DMX 4 DMX 5
DMX2 DMX3 DMX 4 DMX 5
DMX 6 DMX 7 DMX 8
DMX 6 DMX 7 DMX 8
BT-NODE28