Status Menu - Briteq BT-NODE28 Mode D'emploi

ENGLISH

STATUS MENU

The Status menu gives you instant information on several important parameters and selected working mode.
To access the status menu: press the [MENU] button for 2 seconds, followed by the ▲/▼ buttons.
DEVICE NAME
Shows the Device Name of the BT-NODE28. The device name can be set in:

The MENU [>Rename Device]

The MENU [>User Preset>New Setup>xxx>Edit>Device Name] then [MENU >User Preset>New
Setup>xxx>Confirm] to load the edited preset.
IP ADDRESS
Shows the device IP Address of the BT-NODE28. The device IP address can be set in:

The MENU [>Set IP Address]

The MENU [>User Preset>New Setup>xxx>Edit>IP Address] then [MENU >User Preset>New
Setup>xxx>Confirm] to load the edited preset.
DEVICE ID
Shows the device ID of the BT-NODE28. The device ID can be set in:

The MENU [>Set ID NO]

The MENU [>User Preset>New Setup>xxx>Edit>Device ID] then MENU [>User Preset>New
Setup>xxx>Confirm] to load the edited preset.
SELECTED PRESET
Shows the actual preset loaded in the BT-NODE28
PORT STATUS
Shows the status of the ports of the BT-NODE28.
 Port A: Ethernet In
 Port B: Ethernet Tru
 Port 1-8: DMX Ports 1-8
BRITEQ
®
5/66
OPERATION MANUAL
Not connected
Connected
Disabled
Input, Output
BT-NODE28