Before Use - Briteq BT-Laser1500 Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this Briteq
please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device was designed to produce decorative effect lighting and is used in light show systems.
 A superb 1,5Watt Class-IV RGB color laser equipped with 3 powerful, temperature controlled lasers:
 500mW Red laser (638nm)
 200mW Green laser (532nm)
 800mW Blue laser (450nm)
 Thanks to 20kHz scanners this "BT-LASER1500 RGB" projects rock steady sharp RGB- images!
 100% ILDA compatible for full flexibility!
 The internal SD-card reader makes it possible to project your own patterns and logos. On the supplied SD-
card (max 2GB) you can create up to 100 folders with each up to 255 files.
 The 6 user modes make this laser very easy to use:
 MUSIC CONTROL: 100% plug & play, just connect the laser to the mains to start an incredible,
music controlled, laser show based on the 86 internal patterns! Perfect for hiring companies!!!
 MASTER/SLAVE mode: Several units can be used in completely synchronized music mode:
amazing and very simple to use!
 AUTOMATIC mode: all internal programs will be shown automatically, no music needed. Depending
your needs you can choose a fast or soft show.
 DMX mode: two options possible:
 1 channel for extremely easy setup and use!
 13 channels to take full control of all internal programs!
 ILDA mode: connect the laser to any PC with ILDA-compatible interface and use any professional
laser software to create stunning laser shows, create logos, etc.
 SD-CARD mode: playback of preprogrammed shows, logos, patterns on the SD-card.
 Laser projections can be adapted to the size of the venue with X/Y image zoom controls.
 LCD-display for easy navigation in the setup menu.
 Graphics can be mirrored for projections behind a transparent screen
 Blanking technology for nice separate beams
 Perfect for use in clubs, discotheques, publicity, exhibitions, and many more ...
 SAFETY FIRST! Class-IV lasers (more than 500mW output) can damage the human eye very badly so
never buy such high power laser without checking if it passed the severe laser safety tests! This laser
complies to the European EN 60825-1:2007 for Laser Safety! It is equipped with extra safety measures
like:
 Scanner control: if a scanner fails, output is shut down.
 Interlock connection with mechanical shutter: press the safety switch to shut down the output.
 Key switch: only authorized and well trained operators are allowed to use the laser.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
BRITEQ
®
®
product. To take full advantage of all possibilities and for your own safety,
1/59
USER MANUAL
BT-LASER1500 RGB