Transport - Stihl MSA 160 C Notice D'emploi

English
Specifications
Battery
Type: Lithium ion
The machine can be used with STIHL
type AP batteries.
The running time of the machine
depends on the energy of the battery
(e. g., 80 Wh with AP 80 or 160 Wh with
AP 160).
Charger
AL 100
Mains voltage: 120 V
Rated current: 1.3 A
Frequency: 60 Hz
Power consumption: 75 W
Charging current: 1.6 A
Protection class: II, E (double
insulated)
AL 300
Mains voltage: 120 V
Rated current: 4.7 A
Frequency: 60 Hz
Power consumption: 330 W
Charging current: 6.5 A
Protection class: II, E (double
insulated)
36
All manuals and user guides at all-guides.com
Charging times
AL 100
with AP 80:
– up to 80 % capacity:
– up to 100 % capacity: 100 min
with AP 160:
– up to 80 % capacity:
– up to 100 % capacity: 165 min
AL 300
with AP 80:
– up to 80 % capacity:
– up to 100 % capacity: 50 min
with AP 160:
– up to 80 % capacity:
– up to 100 % capacity: 60 min
Chain lubrication
Fully automatic, speed-controlled oil
pump with reciprocating piston
Oil tank capacity: 0.21 l
Weight
With cutting attachment, without battery
MSA 160 C: 3.2 kg
Cutting attachment
Your STIHL servicing dealer will be
happy to help you properly match your
engine with the appropriate bar/chain
combinations to reduce the risk of
kickback injury.
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Guide bars Rollomatic E Mini
1/4" Picco
70 min
Cutting length:
Pitch:
Groove width:
150 min
Sprocket nose:
Saw chains 1/4" Picco
Picco Micro (71 PM3)
Pitch:
25 min
Drive link gauge:
Chain sprocket
35 min
7-tooth for 1/4" P

Transport

STIHL batteries fulfill the requirements
stated in UN-Manual
ST/SG/AC.10/11/Rev.5 Part III,
Subsection 38.3.
The user can transport STIHL batteries
by road transport to the place where the
machine is to be used without additional
requirements.
Observe national regulations for air or
sea transport.
30 cm
1/4" P (6.35 mm)
1.1 mm
10-tooth
1/4" P (6.35 mm)
1.1 mm
MSA 160 C