Filling Chain Oil Tank - Stihl MSA 160 C Notice D'emploi

English

Filling Chain Oil Tank

N Check oil level before starting work,
while sawing, and each time the
battery is changed
N Refill chain oil at the latest every
second time the battery is changed
If the oil tank is still partly full, the reason
may be a problem in the oil supply
system: Check chain lubrication, clean
the oil passages, contact your servicing
dealer for assistance if necessary.
STIHL recommends that all
maintenance and repairs be carried out
by STIHL servicing dealers
Oil filler cap
N Thoroughly clean the filler cap and
the area around it to ensure that no
dirt falls into the tank
N Always position the machine so that
the filler cap is facing upwards
18
All manuals and user guides at all-guides.com
Opening
N Swing the clip into an upright
position
N Turn the cap counterclockwise
(approx. 1/4 turn)
N Remove fuel filler cap
Filling Chain Oil Tank
Take care not to spill chain oil during
refilling and do not overfill the tank.
STIHL recommends use of the STIHL
filling system for chain oil (special
accessory).
N Filling Chain Oil Tank
Closing
Clip is in an upright position:
N Fit the cap – position marks on the
cap and the filling port must line up
N Push the cap down as far as it will
go
N Hold the cap down and twist it
clockwise until it engages
MSA 160 C