Checking And Replacing The Chain Sprocket - Stihl MSA 160 C Notice D'emploi

English
Battery storage
N
Remove the battery from the
machine or charger
N Store in a closed, dry space and
keep in a secure location. Protect
against unauthorized use (e. g., by
children) and dirt
N Do not store backup batteries
unused – use them in alternation
For optimum service life:
N store at temperatures of + 10 °C to
+ 20 °C
N Store at a charge state of
approx. 30 %
Storing the charger
N Remove battery
N Disconnect the mains plug
N Store charger in a closed, dry space
and keep in a secure location.
Protect against unauthorized use
(e. g., by children) and dirt
28
All manuals and user guides at all-guides.com
Checking and Replacing
the Chain Sprocket
N Remove chain sprocket cover, saw
chain and guide bar
N Release chain brake – set hand
guard to ‚
Fitting new chain sprocket
– after use of two saw chains or
earlier
– if the wear marks (arrows) are
deeper than 0.5 mm – otherwise the
service life of the saw chain is
reduced – use check gauge (special
accessory) to test
Using two saw chains in alternation
helps preserve the chain sprocket.
STIHL recommends use of original
STIHL chain sprockets in order to
ensure optimal functioning of the chain
brake.
3
1
2
N Use a screwdriver to remove the E-
clip (1)
N
Remove the washer (2)
N
Remove chain sprocket (3)
2
1
3
N
Fit new chain sprocket – make
certain that the guide pins of the
worm (arrows) line up with the
openings provided on the chain
sprocket and push on the chain
sprocket as far as it will go
N Install washer (2) and E-clip (1)
MSA 160 C