Section 3 − Installation; Specifications - Miller Spoolmate 200 Manuel Du Propriétaire

3-1. Specifications

Approximate
Wire Feed
Wire Diameter Range
.030 Thru .035 in.
(0.8 Thru 0.9 mm)
Aluminum Wire 50 To 800 ipm
(1.3 To 20.3
.023 Thru 035 in.
(0.8 Thru 0.9 mm)
Hard Or Cored Wire
.
Use welding power source Owner's Manual during gun installation. If contact tip, liner, and drive roll groove are not correct for wire size and type,
see Section 5 to change parts as needed. See Parts List for other available contact tips.
Notes
SECTION 3 − INSTALLATION
Cooling Maximum Spool
Method
Range
Air Cooled
mpm)
Weld Circuit
Size Rating
100 Volts, 160
Amperes, 60%
4 in. (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
MATERIAL THICKNESS REFERENCE CHART
Overall
Weight
Dimensions
Length:
15-1/4 in. (387 mm)
Width:
11.0 lb (5.0 kg)
2-1/2 in. (64 mm)
Gun With Cable
Height:
9 in. (229 mm)
24 Gauge (.025 in.)
22 Gauge (.031 in.)
20 Gauge (.037 in.)
18 Gauge (.050 in.)
16 Gauge (.063 in.)
14 Gauge (.078 in.)
1/8 in. (.125 in.)
3/16 in. (.188 in.)
1/4 in. (.25 in.)
5/16 in. (.313 in.)
3/8 in. (.375 in.)
1/2 in. (.5 in.)
OM-243 762 Page 11