Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
ELECTRICAL SECTION
IMPORTANT: This appliance is to be installed only by an authorised person according
to the current local regulations and in observation of the manufacturer's instructions.
Incorrect installation, for which the manufacturer accepts no responsibility, may
cause damage to persons, animals and things.
Before effecting any intervention on the electrical parts of the appliance, the
connection to the network must be interrupted.
The connection of the appliance to earth is mandatory.
The manufacturer declines all responsability for any inconvenience resulting from
the inobservance of this condition.
If you note a crack in the cooktop, switch the appliance off immediately and call the
After-Sales Service.
GENERAL
•
Connection to the mains must be carried out by qualified personnel in accordance with
current regulations.
•
The appliance must be connected to the mains checking that the voltage corresponds
to the value given in the rating plate and that the electrical cable sections can withstand
the load specified on the plate.
•
The appliance can be connected directly to the mains placing an omnipolar switch
with minimum opening between the contacts of 3 mm between the appliance and the
mains.
•
The power supply cable must not touch the hot parts and must be positioned so that it
does not exceed 50°C at any point.
•
Once the appliance has been installed, the switch or socket must always be accessible.
•
If the power supply cable is damaged it must be substituted by a suitable cable
available in the after sales service.
N.B. For connection to the mains, do not use adapters, reducers or branching
devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system or if the socket and
appliance plug are incompatible, call an expert.
He should also check that the socket cable section is suitable for the power absorbed by
the appliance.
15
15
Publicité
Table des Matières
