1
INSTALLATION
LOCATION
The installation conditions, concerning protection against overheating of the surfaces
adjacent to the cooker, must conform to figs. 1.1.
The appliance must be kept no less than 50 mm away from any side wall which exceed the
height of the hob surface .
The veneered syntetical material and the glue used must be resistant to a temperature of
150°C in order to avoid ungluing or deformations.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 70 °C above
room temperature.
Do not install the appliance near inflammable materials (eg. curtains).
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out.
Fig. 1.1
11
11