Electrical Section - Elba N55 340 Série Mode D'emploi

8

ELECTRICAL SECTION

IMPORTANT: The cooker must be in-
stalled in accordance with the manu-
facturer's instructions.
Incorrect installation, for which the
manufacturer accepts no responsibili-
ty, may cause damage to persons, ani-
mals and things.
GENERAL
• Connection to the mains must be carri-
ed out by qualified personnel in accor-
dance with current regulations.
• The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical ca-
ble sections can withstand the load
specified on the plate.
• Only for models N55 .. 340, N55 ..
342:
– The cooker is supplied without a
power supply plug and therefore if
you are not connecting directly to
the mains, a standardized plug su-
itable for the load must be fitted.
– The plug must be connected to an
earthed socket in compliance with
safety standards.
• If the cooker is to be connected direct-
ly to the mains, it must be placed with
an omnipolar switch with minimum
opening between the contacts of 3 mm
between the appliance and the mains.
• The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
• Once the cooker has been installed,
the switch or socket must always be
accessible.
• If the power supply cable is damaged
it must be substituted by a suitable ca-
ble available in the after sales service.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system, call an expert.
He should also check that the domestic
electrical system is suitable for the power
absorbed by the appliance.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sability for any inconvenience resulting
from the inobservance of this condi-
tion.
27